BLUEPOOL ST175S Heat Exchanger -Stainless Steel -600K

• Standard chlorinated pools
• Fresh water applications
• Pool heating
• Oil/glycol coolers
• In-floor heating

• High efficiency, coefficient up to 10000 w/m2 deg C, Heat exchanging capacity 3-7 times traditional equipment.
• Compact configuration, occupy small area, one tenth as the traditional equipment.
• Stainless steel material, endure high temperature, pressure and minimum corrosion.
• Helix screw thread elasticity heat exchange bundle, eliminate the stress.
• Design flux speed is 5.5m/s, less dirt
• Big flow volume
• Compactible
• Easy installation and durable.

• Material: All stainless steel 316L
• Design Temperature: 208 C (406 F)
• Heat transfer area : 1.55 square meters/16.7 square feet
• Fittings: 2.5" pool side | 2" solar/boiler side
• Normal working capacity: 600,000 BTU/hr (175Kw/hr)
• Dimensions 4.5" x 33.9"
• Weight: 24.5 LBS

• ST45 is a smaller solar poolheat exchanger that is typically used in conjunction with an existing pool heater and solar. This unit will do a good job of maintaining the water temperatures initially supplied by an auxiliary heat source such as a gas heater. Total Heat exchange surface area is 0.33 M²(3.55 ft²)
• ST88 is a larger pool heat exchanger that can be used with a larger solar system and other heat sources as the primary heat source. Sizing the pool collectors is important for proper operation of a solar pool heater. Total Heat exchange surface area is 0.64 M²(6.9 ft²)
• ST175 is an x-largeor commercial pool heat exchanger that can be used with a larger solar system and other heat sourcesas the primary heat source. Sizing the pool collectors is important for proper operation of a solar pool heater. Total Heat exchange surface area is1.55 M²(16.7ft²)

Add Heat ExchangersinSeriesto Expand System Sizing for Larger Pools